Improved Design of Dies for the Extrusion of Sheets and Annular Parisons (Ⅰ) Neglecting the Effects of the Slope of the Manifold;

塑料板材和吹塑型坯擠出口模設計的一種改進(Ⅰ)忽略歧管斜率的影響

Improved Design of Dies for the Extrusion of Sheets and Annular Parisons (Ⅱ)Including the Effects of the Slope of the Manifold;

塑料板材和吹塑型坯擠出口模設計的一種改進(Ⅱ)考慮歧管斜率的影響

Disconnect exhaust pipe at manifol

在歧管處斷開排氣管。

Disconnect the exhaust pipe at the exhaust manifol

斷開排氣歧管的排氣管。

Remove water manifold and recovery hose.

拆卸水歧管和回收軟管。

exhaust manifold heat control valve

排氣歧管熱量控制閥

Remove exhaust manifold heat shiel

拆下排氣歧管隔熱罩。

Remove manifold from the cylinder hea

從汽缸頭拆下歧管。

Remove intake manifold bolts.

拆下進氣歧管螺栓。

The gases pass into the exhaust manifold.

這些廢氣進入排氣歧管。

PSMR (Pneumatic System Manifold Regulator)

氣動系統歧管調節器

Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).

安裝進氣歧管（見單元11-排氣系統和進氣歧管）。

Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).

拆下進氣歧管（見單元11-排氣系統和進氣歧管）。

automatic choke to manifold pipe

自動阻氣門至歧管連接管

Disconnect the exhaust pipe at the engine exhaust manifol

拆開引擎排氣歧管處的排氣管。

Install charge air cooler hose to intake manifol

安裝充電空氣冷卻油管到進氣歧管。

Disconnect vacuum hose from vacuum port on the intake manifol

自進氣歧管真空口拆下真空軟管。

Connect the exhaust pipe to the hanger and to the engine exhaust manifol

連接排氣管到懸掛物、到引擎排氣歧管。

This device, called the manifold heat-control valve, is built into the exhaust and intake manifold.

這種裝置稱為“歧管熱控制閥”，它拼裝在排氣與進氣歧管中。

This vacuum, called intake-manifold vacuum, varies as the operating conditions change.

這個真空叫做進氣歧管真空。這種進氣歧管真空隨運轉情況而變化。